Mechanical Seal

Product Details:

Agitator-mixer-vessel Mechanical Seal
Series AES-019 are preset factory assembled cartridge seals for use in Agitators, Mixers and Reactor Vessels. The seals construction vary slightly for top entry vessels, side entry vessels and bottom entry vessels. The seals are designed to the shortest shaft length and the bearings are located as close to the vessel body to minimize the deflection.

 
SEAL CHARACTERISTICS• Single Seal/Double Seal
• Unbalanced/Balanced
• Independent on direction of rotation
 
 
APPLICATIONS• General Chemicals and its vapours.
• Petrochemicals and its vapours.
• Light Hydrocarbons and its vapours.
 
 
PERFORMANCE RANGE• Shaft Diameter : 25...150mm
• Pressure            : vacuum ....40 bar (max)
• Temperature     : -20...220OC
• Velocity              : 4 m/sec
 
 
MATERIALS• Seal Faces : Carbon, SiC, Tung. Carbide
• Metal Parts : SS316, Hastelloy-C, Alloy 20
• Bellows : Elastomers, PTFE

Additional Information:

• Production Capacity: 1000

Product Details:

Mechanical Seals Manufacturers & Suppliers in India

Operation Parameters:

Pressure: 0 ~ 1.5 MPa

Temperature: - 40 ~ 180 ºC

Linear Speed: 20 m/s or less

Pressure of Cooling Water: 25% higher than the subject's operating pressure

Solid Capacity: 15% or less

Materials:

Rotary Ring Face

Medium Side: SiC/TC

Sealing Water Side: SiC/TC

Stationary Ring Face

Medium Side: SiC/TC

Sealing Water Side: Carbon/SiC/TC

Elastomers: Viton/EPDM/PTFE/Aflas

Springs: SS316/HC276

Metal Parts: SS304/SS316/SS316L/2507/2205

Mediums: oil, water, sulphite lyes, paper pulp, acid, alkali and other solvents.
Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.

Additional Information:

• Production Capacity: 1000

Product Details:

Single SPRING UNBALANCED SEALS

Series AES-005-006 are spring, pusher type unbalanced seals used for universal applications. The seals are compact in design suiting all types of rotating equipments, pumps and mixers. Drive lugs in the retainer will provide torque transmission and reduce slippage on shaft and sleeve. A snap ring holds all components together, helping in easy installation. The parts are interchangeable, QE400 can be converted to QE401 by just changing the seal ring and the secondary member.

 

SEAL CHARACTERISTICS• Single Seal
• Unbalanced
• Independent on direction of rotation

 

 

APPLICATIONS• General Chemicals
• Petrochemicals
• Refineries
• Light hydrocarbons

 

 

PERFORMANCE RANGE• Shaft Diameter : 18...100mm
• Pressure             : 10 bar (max)
• Temperature     : -20...240OC
• Velocity              : 20 m/sec

 

 

MATERIALS• Seal Faces :Carbon, SiC, Tung. Carbide
• Metal Parts : SS316, Hastelloy-C, Alloy 20
• O-rings : Elastomers (400)
Elastomers (401)

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Production Capacity: 1000

Product Details:

METAL BELLOW SEALS

Series AES-010 seals are used in refining, petrochemicals and chemical industries. Static o-ring is used as a secondary member. The absence of dynamic o-ring prevents possibility of seal hang-up. Centroid loaded face design increases seal life by avoiding seal face distortion caused due to thermal expansion and also ensures optimum face flatness over a wide operating condition. As a standard, AM350 bellow cores are used. For chemical compatibility Alloy C-276 or Alloy 718 bellow cores can be used.

 

SEAL CHARACTERISTICS• Single Seal
• Balanced
• Metal Bellows
• Independent on direction of rotation

 

 

APPLICATIONS• General Chemicals
• Petrochemicals
• Refineries

 

 

PERFORMANCE RANGE• Shaft Diameter : 18...100mm
• Pressure             : 20 bar (max)
• Temperature     : -20...220OC
• Velocity              : 20 m/sec

 

 

MATERIALS• Seal Faces :Carbon, SiC, Tung. Carbide
• Metal Parts : SS316, Carpenter 42, Hastelloy-C, Alloy 20
• O-rings :Elastomers, PTFE

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Production Capacity: 200

Product Details:

GRUNDFOS PUMP SEALS

Series AES-016 Grundfos pumps seals are very easy to replace and gives maximum reliability. It is durable and made from hardwearing material which prevent he downtime and prolong the lifetime of the seal. All axial movement has been eliminated, preventing wear of the shaft and the rubber parts. There is o special tool required to replace the seal or dismantling the pump.

 

FEATURESIt gives long and reliable seal life. Easy to install without any tool

 

 

PERFORMANCE RANGE• Pressure : Upto 20 kg/cm2C
• Temperature : -200...180O
• Speed : 3000 RPM

 

 

MATERIALSHardware : SS 304, SS 316
Seal Ring : SiC, SiC
Mating Ring : TC, SiC, Carbon, Special Cast
Secondary Seal : EPDM, Silicon, FKM

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Production Capacity: 500

Product Details:

• Dry Running Mechanical Seal
• Shaft Size - 25mmTo200mm
• M.O.C. - SS304,SS316,
• Seal Face - Carbon,Sic,TC
• O'Ring - EPDM,FKM,PTFE,FEP

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 Week

Product Details:

Series AES-020 is single spring seal developed for light contamination, dirty media and clogging type application. These type also allows it to fit onto a normal shaft without any balancing step. The mechanical drive of this seal is realised by grub screw which lock onto the shaft. The seal has a limited axial length, compact shape which allows easy mounting.

 

SEAL CHARACTERISTICS• Single Seal
• Balanced
• Helical Coil spring
• Independent on direction of rotation

 

 

APPLICATIONS• General Chemicals
• Petrochemicals
• Light hydrocarbons

 

 

PERFORMANCE RANGE• Shaft Diameter : 25/100mm
• Pressure       : 30 bar (max)
• Temperature   : -20...140OC
• Velocity       : 15 m/sec

 

 

MATERIALS• Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide
• Metal Parts : SS304, SS316, Special Alloy
• O-rings : Elastomers, PTFE

Additional Information:

• Item Code: SeriesAES-020
• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 1000
• Delivery Time: 3 / 4

Product Details:

MECHANICAL SEAL 
SIZE - 25 TO 100MM
ALL

Bottom Entry Agitator Mechanical Seal

Dry Running Mixer Seals ,

Agitoter Mixer Seals ,

Series AES-019 are preset factory assembled cartridge seals for use in Agitators, Mixers and Reactor Vessels. The seals construction vary slightly for top entry vessels, side entry vessels and bottom entry vessels. The seals are designed to the shortest shaft length and the bearings are located as close to the vessel body to minimize the deflection.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 week

Product Details:

Alfa Laval LKH Pump Mechanical Seals For Milk Plant

size - 22mm & 32mm

matel part ss304, ss316

O'ring - NBR,EPDM,FKM,FEP

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1day

Product Details:

TEFLON BELLOW SEALS

Series AES-007 & AES-008 are external mounted seal designed for extremely corrosive application such as acids, salts, organic compounds and reducing agents. All materials coming in contact with the liquid are made of chemically inert material. Metallic components are isolated from the liquid.
Series AES-007 : Seal faces not replaceable. Glass field PTFE face is composite moulded with flexible PTFE bellow.
Series AES-008 : Seal faces are replaceable and can be supplied with hard materials suitable for abrasive services.

 

SEAL CHARACTERISTICS• Single Seal
• Outside Mounted
• Independent on direction of rotation

 

 

APPLICATIONS• Extremely Corrosive application

 

 

PERFORMANCE RANGE• Shaft Diameter : 18...100mm
• Pressure : 6 bar (max)
• Temperature : -45...120OC
• Velocity : 20 m/sec

 

 

MATERIALS• Seal Faces :GFT, SiC, Ceramic
• Metal Parts : SS304, SS316, Hast-C
• TEFLON Bellow

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Production Capacity: 1000
• Delivery Time: TO Day

Product Details:

APPLICATIONS OF MECHANICAL SEALS IN THE PULP & PAPER

• Medium Consistency Pumps
• Cooking Pumps for chemical pulp mills
• Centrifugal and volumetric process pumps
• Agitators and mixers
• Screens
• Refiners
• Pulpers
• Feeders
• Biomass equipment

MATERIALS OF MECHANICAL SEALS IN THE PULP & PAPER

• Carbon
• Silicon Carbide
• Silicon Carbide with Diamond Coating
• Tungsten Carbide
• EPDM
• Fluorelastomers
• Perfluorelastomers
• PTFE Encapsulated elastomers
• Stainless Steel
• Duplex Steel
• Titanium

CHARACTERISTICS OF MECHANICAL SEALS IN THE PULP & PAPER

• High resistance
• Long life
• Great reliability
• Water saving
• Power saving
• Easy to be repaired

Additional Information:

• Production Capacity: 30
• Delivery Time: 1 Week

Product Details:

Series AES-043 Product Description:-

Double Balanced Mechanical Seal Series AES-043 Series are factory assembled cartridge units used on mixers, agitators & reactors. This seals are designed for handling severe services including products emitting toxic vapours during reaction process. The designs incorporates bearing located very close to the seal. This standard feature effectively arrests the shaft whip for smooth and trouble free operation enabling enhanced seal life. The cooling jacket, also a standard feature, helps to maintain cool environment around the seal. Large clearance between the rotating shaft/sleeve and mating ring permits higher deflection of the shaft, invariably associated with top entry agitators.

Seal Components Face:-

Carbon/ Ceramic

Carbon / Silicon Carbide

Carbon / Tungsten Carbide

Secondary Seal : AES-043 Series: PTFE, GFT

Secondary Seal : AES-043 Series: Inboard -PTFE, GFT / Outboard-Elastomers

Metal Parts: SS304, SS316, Hastelloy-C, Hastelloy-B, Monel, Alloy-20, Carbon Steel

Seal Characteristics:-

Double Acting Back to Back

Balanced

Cartridge Unit

Independent of Direction of Rotation

Operated with Pressurised Barrier Fluid

Available Size and Prices:-

Shaft Diameter-25 to 150 mm-Rs.13000 to 150000/Piece

Additional Information:

• Delivery Time: 1WEEK

Product Details:

RUBBER BELLOW SEALS
Series AES-026 is single coil with rubber bellow mainly for use in wast water treatment plants in the sewage applications. The rubber bellow protects the shaft / sleeve from fretting. The bellows is not subjected to any torsonial stress. Torque transmission is through the spring and spring holder. Self aligning features accomodate abnormal shaft runout and primary sealing wear. The single coil spring will avoid effluent particles.

 
SEAL CHARACTERISTICS
• Single Seal
• Unbalanced
• Conical Spring
• Dependent on direction of rotation
 
 
APPLICATIONS
• Water pumps
• Submersible pump
• Sewage pump
 
 
PERFORMANCE RANGE
• Shaft Diameter : 10...100mm
• Pressure       : 20 bar (max)
• Temperature   : -20...180OC
• Velocity       : 10 m/sec
 
 
MATERIALS
• Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide
• Metal Parts : SS304, SS316
• Elastomers : NBR, EPDM,VITON

Additional Information:

• Item Code: AES-026
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ALL
• Production Capacity: 10000

Product Details:

Double Seal for Glass Lined Reactor Mechanical Seals are designed for Top Entry Drives in Glass Lined Vessel. Compact Economical Cartridge Mechanical Seal for Glass Lined Vessel. These Seal specially designed for any mixed and pressurized liquid in Vessel with Top Entry Agitators where no leakage of Highly Acidic Process Gas OR Fluids to the Environment can be tolerated. Complete Pre-assembled Tested Unit ready for installation. These Seal are used for Exclusive Solid Seal Faces, Stationary Seats, thus Lowest Level of Seal face distortion when Expose to Compressive Load and Thermal Pressure.

Product Details:

MULTI SPRING UNBALANCED SEALS
Series AES-012-013 are multi spring, pusher type unbalanced seals used for universal applications. The seals are compact in design suiting all types of rotating equipments, pumps and mixers. Drive lugs in the retainer will provide torque transmission and reduce slippage on shaft and sleeve. A snap ring holds all components together, helping in easy installation. The parts are interchangeable, AES-012-013 can be converted to QE401 by just changing the seal ring and the secondary member.

 
SEAL CHARACTERISTICS• Single Seal
• Unbalanced
• Independent on direction of rotation
 
 
APPLICATIONS• General Chemicals
• Petrochemicals
• Refineries
• Light hydrocarbons
 
 
PERFORMANCE RANGE• Shaft Diameter : 18...100mm
• Pressure             : 10 bar (max)
• Temperature     : -20...240OC
• Velocity              : 20 m/sec
 
 
MATERIALS• Seal Faces :Carbon, SiC, Tung. Carbide
• Metal Parts : SS316, Hastelloy-C, Alloy 20
• O-rings : Elastomers (400)
Elastomers (401)

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Production Capacity: 200

Product Details:

MULTI SPRING UNBALANCED SEALS

Series AES-005-006 are multi spring, pusher type unbalanced seals used for universal applications. The seals are compact in design suiting all types of rotating equipments, pumps and mixers. Drive lugs in the retainer will provide torque transmission and reduce slippage on shaft and sleeve. A snap ring holds all components together, helping in easy installation. The parts are interchangeable, AES-005 can be converted to AES-006 by just changing the seal ring and the secondary member.

 

SEAL CHARACTERISTICS• Single Seal
• Unbalanced
• Independent on direction of rotation

 

 

APPLICATIONS• General Chemicals
• Petrochemicals
• Refineries
• Light hydrocarbons

 

 

PERFORMANCE RANGE• Shaft Diameter : 18...100mm
• Pressure : 10 bar (max)
• Temperature : -20...240OC
• Velocity : 20 m/sec

 

 

MATERIALS• Seal Faces :Carbon, SiC, Tung. Carbide
• Metal Parts : SS316, Hastelloy-C, Alloy 20
• O-rings : Elastomers (400)
Elastomers (401)

Additional Information:

• Production Capacity: 1000
• Delivery Time: 2 / 3 DAYS

Product Details:

Teflon Bellow Mechanical Seal Teflon Cotted 
Size-25mm To 50MM
Materia Of Part - SS304
Face-GFT,SIC

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1Day

Product Details:

MECHANICAL SEAL 
KSB PUMP MECHANICAL SEAL
KIRLOSKAR PUMP MECHANICAL SEAL
ALFA LAVAL PUMP MECHANICAL SEAL
FRISTAM PUMP MECHANICAL SEAL

Additional Information:

• Production Capacity: 1000

Product Details:

are single spring, pusher type unbalanced seals used for universal applications. The seals are compact in design suiting all types of rotating equipments, pumps and mixers. Drive lugs in the retainer will provide torque transmission and reduce slippage on shaft and sleeve. A snap ring holds all components together, helping in easy installation. The parts are interchangeable,

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1 day

Product Details:

We are also Stockist for Flygt Pump, and Xylem Pump Mechacnail Seal, in All Sizes, 20 ,25 , 35, 45, 60 & 90 mm,
Flygt Mixer And Submersible Sewag Pumps

Product Details:

Series AES- is single coil with rubber bellow mainly for use in wast water treatment plants in the sewage applications. The rubber bellow protects the shaft / sleeve from fretting. The bellows is not subjected to any torsonial stress. Torque transmission is through the spring and spring holder. Self aligning features accomodate abnormal shaft runout and primary sealing wear. The single coil spring will avoid effluent particles.

 

SEAL CHARACTERISTICS• Single Seal
• Unbalanced
• Conical Spring
• Dependent on direction of rotation

 

 

APPLICATIONS• Water pumps
• Submersible pump
• Sewage pump

 

 

PERFORMANCE RANGE• Shaft Diameter : 10...100mm
• Pressure : 20 bar (max)
• Temperature : -20...180OC
• Velocity : 10 m/sec

 

 

MATERIALS• Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide
• Metal Parts : SS304, SS316
• O-rings : Elastomers, TTV

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 1000

Product Details:

Flygt Pumps FS-OU-45 FS-OL-45 Mechanical Seals Shaft Size 45mm For Flygt Pumps

Upper Seal: CAR/TC/VIT
Lower Seal: TC/TC/VIT

Additional Information:

• Production Capacity: 15
• Delivery Time: 3/4 Week
• Packaging Details: Box

Product Details:

Mechanical Seal
Series AES - 50 are preset factory assembled cartridge seals for use in Agitators, Mixers and Reactor Vessels. The seals construction vary slightly for top entry vessels, side entry vessels and bottom entry vessels. The seals are designed to the shortest shaft length and the bearings are located as close to the vessel body to minimize the deflection.

 
SEAL CHARACTERISTICS• Single Seal/Double Seal
• Unbalanced/Balanced
• Independent on direction of rotation
 
 
APPLICATIONS• General Chemicals and its vapours.
• Petrochemicals and its vapours.
• Light Hydrocarbons and its vapours.
 
 
PERFORMANCE RANGE• Shaft Diameter : 25...150mm
• Pressure            : vacuum ....40 bar (max)
• Temperature     : -20...220OC
• Velocity              : 4 m/sec
 
 
MATERIALS• Seal Faces : Carbon, SiC, Tung. Carbide
• Metal Parts : SS316, Hastelloy-C, Alloy 20
• Bellows : Elastomers, PTFE

Additional Information:

• Item Code: AES-050
• Production Capacity: 1000
• Delivery Time: 2 To 3 Days

Product Details:

Alfa Laval LKH Pumps Mechanical Seal

• Operation Parameters:
  • Pressure: 1.2 MPa or less
  • Temperature: - 20 ~ 180 ºC
  • Linear Speed: 10 m/s or less
  Materials:
  • Rotary Ring Face: Carbon
  • Stationary Ring Face: Stainless Steel/SiC/TC
  • Elastomers: NBR/EPDM/Viton
  • Springs: SS304
  • Metal Parts: SS304/SS316

  Mediums: oil, water, sewage, food and beverage.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1 Day
• Packaging Details: Box

Product Details:

M7N Rotary Seal

Series AES-021 is single coil spring seal developed for light contamination, dirty media and clogging type application. These type also allows it to fit onto a normal shaft without any balancing step. The mechanical drive of this seal is realised by grub screw which lock onto the shaft. The seal has a limited axial length, compact shape which allows easy mounting.

 

SEAL CHARACTERISTICS• Single Seal
• Balanced
• Helical Coil spring
• Independent on direction of rotation

 

 

APPLICATIONS• General Chemicals
• Petrochemicals
• Light Hydrocarbons

 

 

PERFORMANCE RANGE• Shaft Diameter : 10...100mm
• Pressure : 30 bar (max)
• Temperature : -20...140OC
• Velocity : 15 m/sec

 

 

MATERIALS• Seal Faces : Carbon, SiC, Tung. Carbide
• Metal Parts : SS304, SS316, Special Alloy 20
• Elastomers : PTFE, VITON,NBR,EPDM

Additional Information:

• Item Code: AES-021
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ALL
• Production Capacity: 100
• Delivery Time: 1 DAY

Product Details:

John Crane Type 2 Rubber Bellow Mechanical  Seals
Series AES-028 is single coil with rubber bellow mainly for use in wast water treatment plants in the sewage applications. The rubber bellow protects the shaft / sleeve from fretting. The bellows is not subjected to any torsonial stress. Torque transmission is through the spring and spring holder. Self aligning features accomodate abnormal shaft runout and primary sealing wear. The single coil spring will avoid effluent particles.
 
SEAL CHARACTERISTICS• Single Seal
• Unbalanced
• Conical Spring
• Dependent on direction of rotation
 
 
APPLICATIONS• Water pumps
• Submersible pump
• Sewage pump
 
 
PERFORMANCE RANGE• Shaft Diameter : 10...100mm
• Pressure : 20 bar (max)
• Temperature : -20...180OC
• Velocity : 10 m/sec
 
 
MATERIALS• Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide
• Metal Parts : SS304, SS316
• Elastomers : NBR, EPDM, VITON

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ALL
• Production Capacity: 1000

Product Details:

UNBALANCED SINGLE ACTING HELICAL COIL SPRING SEALS

Series - AES-002 are preset factory assembled cartridge seals for use in Agitators, Mixers and Reactor Vessels. The seals construction vary slightly for top entry vessels, side entry vessels and bottom entry vessels. The seals are designed to the shortest shaft length and the bearings are located as close to the vessel body to minimize the deflection.

 

SEAL CHARACTERISTICS• Single Seal
• Unbalanced
• Conical Spring
• Independent on direction of rotation

 

 

APPLICATIONS• Water pumps
• Mixers and Agitators
• Sewage pump
• Pulp and papers

 

 

PERFORMANCE RANGE• Shaft Diameter : 10...100mm
• Pressure : 18 bar (max)
• Temperature : -20...140OC
• Velocity : 15 m/sec

 

 

MATERIALS• Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide
• Metal Parts : SS304, SS316
• Bellows : Viton, Nitrile

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Production Capacity: 1000

Product Details:

J1 Type Mechanical Seals
Series AES-030 is single coil with rubber bellow mainly for use in wast water treatment plants in the sewage applications. The rubber bellow protects the shaft / sleeve from fretting. The bellows is not subjected to any torsonial stress. Torque transmission is through the spring and spring holder. Self aligning features accomodate abnormal shaft runout and primary sealing wear. The single coil spring will avoid effluent particles.
 
SEAL CHARACTERISTICS• Single Seal
• Unbalanced
• Conical Spring
• Dependent on direction of rotation
 
 
APPLICATIONS• Water pumps
• Submersible pump
• Sewage pump
 
 
PERFORMANCE RANGE• Shaft Diameter : 10...100mm
• Pressure       : 20 bar (max)
• Temperature   : -20...180OC
• Velocity       : 10 m/sec
 
 
MATERIALS• Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide
• Metal Parts : SS304, SS316
• Elastomers : NBR, EPDM, VITON

Additional Information:

• Item Code: AES-030
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ALL
• Production Capacity: 10000

Product Details:

Series AES-034 The Seal with Single Spring design and is depended on the Shaft Rotation. Looking from Sliding Face of the Rotating Seal Ring is designed as right hand Spring for Shaft Rotation and vice-versa. In Spare ('O' Ring Type) is designed as Torque Transmission from Drive Collar to Spring and Seal Ring. In Spare ('V' Packing Type) is designed as Torque Transmission from Drive Collar to Spring and Seal Ring to be done through Sturdy Drive Lugs. These Seals is cost effective for Basic Application Equipment such as Centrifugal Pump and other Equipment with Rotating Shaft, Handling Crystallizing Slurry, Suspended Solid Slurry, Saturated Chemical Slurry and General Chemical Slurry.

Additional Information:

• Item Code: AES-034
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Delivery Time: 3/4 DAYS

Product Details:

Series AES-021 is wave spring seal
M7N MECHANICAL SEAL
developed for light contamination, dirty media and clogging type application. These type also allows it to fit onto a normal shaft without any balancing step. The mechanical drive of this seal is realised by grub screw which lock onto the shaft. The seal has a limited axial length, compact shape which allows easy mounting.

 

SEAL CHARACTERISTICS• Single Seal
• Balanced
• Helical Coil spring
• Independent on direction of rotation

 

 

APPLICATIONS• General Chemicals
• Petrochemicals
• Light hydrocarbons

 

 

PERFORMANCE RANGE• Shaft Diameter : 10...100mm
• Pressure       : 30 bar (max)
• Temperature   : -20...140OC
• Velocity       : 15 m/sec

 

 

MATERIALS• Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide
• Metal Parts : SS304, SS316, Special Alloy
• O-rings : Elastomers, PTFE

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

Fristam, Zeutec & Zeuzer Pumps Mechanical Seal             

Product Details:

RUBBER BELLOW MECHANICAL SEALS Series AES-027 is single coil with rubber bellow mainly for use in wast water treatment plants in the sewage applications. The rubber bellow protects the shaft / sleeve from fretting. The bellows is not subjected to any torsonial stress. Torque transmission is through the spring and spring holder. Self aligning features accomodate abnormal shaft runout and primary sealing wear. The single coil spring will avoid effluent particles. SEAL CHARACTERISTICS• Single Seal• Unbalanced • Conical Spring • Dependent on direction of rotation APPLICATIONS• Water pumps• Submersible pump • Sewage pump PERFORMANCE RANGE• Shaft Diameter : 10...100mm• Pressure : 20 bar (max) • Temperature : -20...180OC • Velocity : 10 m/sec MATERIALS• Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide• Metal Parts : SS304, SS316 • Elastomers : NBR, EPDM, VITON

Additional Information:

• Port of Dispatch: ALL
• Production Capacity: 10000

Product Details:

SLURRY SEALS
Series AES-018 is a compact cartridgised balanced seal specially developed for handling slurries, sludges, thick syrups and polymerising fluids. In the cartridge construction the springs are isolated from the fluid enhancing the seal life. After detaching of the location plates provided, the seal can be easily installed straight away without setting measurements. Series AES-019 is a sturdy, robust, seal capable of maintenance free runs for years together.

 
SEAL CHARACTERISTICS• Single Seal
• Balanced
• Independent on direction of rotation
• Cartridge Unit
 
 
APPLICATIONS• Pulp & Paper
• Slurry pumps
• Sludge pumps
 
 
PERFORMANCE RANGE• Shaft Diameter : 20...100mm
• Pressure : 18 bar (max)
• Temperature : -20...180OC
• Velocity : 20 m/sec
 
 
MATERIALS• Seal Faces :Carbon, SiC, Tung. Carbide
• Metal Parts : SS316, Hastelloy-C, Alloy 20
• Packing : Elastomers

Additional Information:

• Production Capacity: 25

Product Details:

Teflon Bellow Mechanical Seal Close Type

Product Details:

WAVE SPRING UNBALANCED SEALS

Series AES-023 are Wave spring, pusher type unbalanced seals used for universal applications. The seals are compact in design suiting all types of rotating equipments, pumps and mixers. Drive lugs in the retainer will provide torque transmission and reduce slippage on shaft and sleeve. A snap ring holds all components together, helping in easy installation. The parts are interchangeable, AES-023 can be converted to AES-023 by just changing the seal ring and the secondary member.

 

SEAL CHARACTERISTICS• Single Seal
• Unbalanced
• Independent on direction of rotation

 

 

APPLICATIONS• General Chemicals
• Petrochemicals
• Refineries
• Light hydrocarbons

 

 

PERFORMANCE RANGE• Shaft Diameter : 18...100mm
• Pressure : 10 bar (max)
• Temperature : -20...240OC
• Velocity : 20 m/sec

 

 

MATERIALS• Seal Faces : Carbon, SiC, Tung. Carbide
• Metal Parts : SS316, Hastelloy-C, Alloy 20
• O-rings : Elastomers (005) Elastomers (006)

 

Products

• CONICAL SPRING UNBALANCED SEALS
• UNBALANCED SINGLE ACTING HELICAL COIL SPRING SEALS
• CONICAL SPRING BALANCED SEALS
• RUBBER BELLOW SEALS
• MULTI SPRING UNBALANCED SEALS
• PTFE BELLOW SEALS
• BALANCED SINGLE COIL SPRING SEAL
• METAL BELLOW SEALS
• METAL BELLOW SEALS
• MULTI SPRING UNBALANCED SEALS
• CAPSULATED SPRING SEALS
• PUSHER SEAL
• GRUNDFOS PUMP SEALS
• HIGH PRESSURE SEALS
• SLURRY SEALS
• AGITATOR-MIXER-VESSEL SEAL

Additional Information:

• Item Code: AES-023
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 1000
• Delivery Time: 3/4DAYS

Product Details:

HIGH PRESSURE SEALS

Series AES-017 mechanical seals are designed for heavy duty service involving high pressure and sliding velocities. This seal has positive drive arrangement and sturdy construction making the seal suitable for high pressure application. Multiple spring design provides uniform face loading. The seal is supplied as a cartridge unit and can be directly bolted to stuffing box. These seals are normally used in main oil pipelines, water injection pumps and boiler feed water pumps.

 

SEAL CHARACTERISTICS• Single Seal
• Balanced
• Independent on direction of rotation

 

 

APPLICATIONS• Main Oil Pipeline
• Water Injection Pumps
• Boiler Feed Water Pumps

 

 

PERFORMANCE RANGE• Shaft Diameter : 25...150mm
• Pressure            : 80 bar (max)
• Temperature     : -20...220OC
• Velocity              : 20 m/sec

 

 

MATERIALS• Seal Faces : Carbon, SiC, Tung. Carbide
• Metal Parts : SS316, Hastelloy-C, Alloy 20
• Bellows : Elastomers

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Production Capacity: 25

Product Details:

THERMOSYPHON SEAL SUPPORT SYSTEM
 
AES-038 STANDARD TYPE         
METAL PARTS
Thermosyphon shell: Carbon steel, SS 316, SS 304
Cooling coil: SS 316, SS304
 
 
This is used for double mechanical seals in tandem or back to back arrangement to provide necessary lubrication and cooling to the seal faces to achieve recommended seal life and comes equipped with cooling coil inside the shell to bring down the temperature of barrier fluid coming from seal to thermosyphon 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

METAL BELLOW SEALS

Series AES-011 seals specially designed for high temperature application and suitable for high start-up toque since the bellows unit is independent of torque transmission. Grafoil is used as a secondary member having excellent temperature range upto 400OC. Shrunk fit seal face design minimize face distortion restricting leakage and wear rate to very low level under a wide range of condition.

 

SEAL CHARACTERISTICS• Single Seal
• Balanced
• Metal Bellows
• Independent on direction of rotation

 

 

APPLICATIONS• High temperature applications
• Petrochemicals
• Refineries

 

 

PERFORMANCE RANGE• Shaft Diameter : 18...100mm
• Pressure             : 20 bar (max)
• Temperature     : -20...400OC
• Velocity              : 20 m/sec

 

 

MATERIALS• Seal Faces :Carbon, SiC, Tung. Carbide
• Metal Parts : SS316, Carpenter 42, Hastelloy-C, Alloy 20
• Packing : Grafoil

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Production Capacity: 200

Product Details:

Agitator-mixer-vessel Mechanical Seal
Series AES-019 are preset factory assembled cartridge seals for use in Agitators, Mixers and Reactor Vessels. The seals construction vary slightly for top entry vessels, side entry vessels and bottom entry vessels. The seals are designed to the shortest shaft length and the bearings are located as close to the vessel body to minimize the deflection.

 
SEAL CHARACTERISTICS• Single Seal/Double Seal
• Unbalanced/Balanced
• Independent on direction of rotation
 
 
APPLICATIONS• General Chemicals and its vapours.
• Petrochemicals and its vapours.
• Light Hydrocarbons and its vapours.
 
 
PERFORMANCE RANGE• Shaft Diameter : 25...150mm
• Pressure            : vacuum ....40 bar (max)
• Temperature     : -20...220OC
• Velocity              : 4 m/sec
 
 
MATERIALS• Seal Faces : Carbon, SiC, Tung. Carbide
• Metal Parts : SS316, Hastelloy-C, Alloy 20
• Bellows : Elastomers, PTFE

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Production Capacity: 05

Product Details:

mechanical seals are designed for heavy duty service involving high pressure & high temperature seals and sliding velocities. This seal has positive drive arrangement and sturdy construction making the seal suitable for high pressure & high temperature seals application. Multiple spring design provides uniform face loading. The seal is supplied as a cartridge unit and can be directly bolted to stuffing box. These seals are normally used in main oil pipelines, water injection pumps and boiler feed water pumps.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1week